![]() Seen on a x58 and z68 with Legacy UniBeast USB.Then use your BIOS hotkey to select a boot device as above.Ĭlover doesn't boot, BIOS shows Boot1: /boot then on a new line 5 If the UEFI entry for your drive doesn't appear, look for CSM in BIOS and either set it to disabled altogether or UEFI only.Select "UEFI:YourDrive" (either system drive or USB install drive, depending) Use your BIOS hotkey to select a boot device.BIOS is trying to boot legacy but the install was done UEFI.Install Clover again to the El Capitan driveĬlover doesn't boot, BIOS shows Boot1: error.Run "diskutil corestorage revert /dev/diskX" (where X is the drive with CoreStorage).Boot from the install USB to El Capitan (or Recovery).from an old software RAID or encrypted drive setup) and you can do without it: If you can boot from USB but not system drive, and one of the drives is using CoreStorage (e.g.If using MBR in legacy mode, see this post.Try recreating the installer USB using Master Boot Record (MBR) instead of GUID.One person with 4 RAM sticks fixed it by removing all but 1 RAM stick (though in general, 2 sticks in dual-channel mode is more compatible).Ĭlover doesn't boot, just shows boot0af error. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |